If you begin to notice that the speed of the Internet via WiFi is not what it used to be, and the lights on the router are flashing intensively even when you are not using a wireless connection, then it is quite possible that you decide to change the WiFi password. It is not difficult to do this, and in this article we will look at how.

Note: after you change your Wi-Fi password, you may encounter one problem, here is its solution:.

In order to change the password for Wi-Fi on Asus Rt-N10, RT-G32, Asus RT-N12 routers, launch a browser on the device connected to the router (you can use wire or Wi-Fi) and enter in the address bar 192.168.1.1, then, when asked about the login and password, enter either the standard login and password for Asus routers - admin and admin, or, if you changed the standard password to your own, enter it.

1. In the menu on the left under " Additional settings» Select 'Wireless Network'
2. Specify the desired New Password in the "WPA Preshared Key" item (if you use the WPA2-Personal authentication method, which is the most secure)
3. Save your settings

After that, the password on the router will be changed. It should be noted that when connecting devices that have previously connected via Wi-Fi to a custom router, you may need to “forget” the network in this router.

TP Link

To change the password on the TP-Link WR-741ND WR-841ND router and others, you need to go to the address 192.168.1.1 in the browser from any device (computer, laptop, tablet) that is connected to the router by wire directly or via WiFi networks.

1. The standard login and password for entering the TP-Link router settings are admin and admin. If the password does not fit, remember what you changed it to (this is not the same password as for the wireless network).
2. Select "Wireless" or "Wireless" from the menu on the left
3. Select "Security wireless network or "Wireless Security"
4. Enter your new Wi-Fi password in the PSK Password field (if you have selected the recommended WPA2-PSK authentication type.
5. Save your settings

It should be noted that after you change your Wi-Fi password, some devices will require you to delete the wireless network information with the old password.

How to change the password on a Zyxel Keenetic router

To change the Wi-Fi password on Zyxel routers, on any device connected to the router via a local or wireless network, launch a browser and enter 192.168.1.1 in the address bar and press Enter. When prompted for a login and password, enter either the standard Zyxel login and password - admin and 1234, respectively, or if you have changed the default password, then enter your own.

After that:

1. In the menu on the left, open the Wi-Fi menu
2. Open "Security"
3. Enter a new password. In the "Authentication" field, it is recommended to select WPA2-PSK, the password is specified in the Network Key field.

Save your settings.

How to change the password on a Wi-Fi router of another brand

Changing the password on other brands of wireless routers such as Belkin, Linksys, Trendnet, Apple Airport, Netgear and others is done in a similar way. In order to find out the address at which you want to log in, as well as the login and password for logging in, just refer to the instructions for the router or, even easier, look at the sticker on its back - as a rule, this information is indicated there. Thus, changing the password on Wi-Fi is very simple.

However, if something didn’t work out for you, or you need help with your router model, write about it in the comments, I will try to answer as quickly as possible.

The security of a Wi-Fi network depends on a well-chosen password. Say, "What's the difference? unlimited Internet, there is enough speed, it makes sense to mess around to figure out how to change the password on a wifi router.

Today, home networks play an important role in life modern people. With their help, users combine computers into groups, which allows you to exchange information, as well as play joint games. But, do not forget about the security of such groups, because the radius of the access point is large enough, and anyone can connect to the router, including intruders. Therefore, it is recommended to set a complex key.

If friends and neighbors just use the Internet, and at a time when access to the network is not needed, this is not so scary. But they think about the option “how to change the password on a wifi router” after unpleasant situations. Starting from the need to quickly download an array of files during peak hours, when the ping exceeds 10 milliseconds, and ending with the banal “got into the wrong settings and ruined it”. In addition, please note that for illegal actions from a personal IP address, the owner will be punished, and not the attacker who connected to the router.

To prevent this from happening, do not be too lazy to find out how to change the password on a WiFi router, and do it.

Strong password - secure network

The password is a necessary security. You will have to choose a combination of 8 characters (minimum), which may include numbers and letters of the Latin layout. Wherein Special symbols can not be used, but it is better to take care of the singularity of the keygen. Here, as on the Internet, the same security rules and the choice of a reliable key apply. There are many tips and programs on the net that generate hack-resistant passwords. That's just using services of this kind, do not be too lazy to change 1-2 characters in the result. For reliability. And don't forget to write it down. Believe me, a notepad for logins and passwords often helps out. If you save the data to the device for yourself, then the factory reset procedure, which you just considered, will no longer have to be performed.

On most routers, the word admin is selected as the default preset for the login and password. But, nevertheless, using the same password for a new login will not work, the system will request a length of at least eight characters.

Changing the password: basic rules

Let's start, perhaps, with the most difficult option: the router got from someone, without a box and a password. This is really a question, how to change wi-fi password. First, turn the router upside down and carefully copy the data from the factory sticker. Usually it says 192 168 1 1 wi fi, and most often it asks to change the password at this address.

The “Reset” button on the router case resets all device settings to factory settings, which is often why access to it is structurally limited, it is closed by a panel that cannot be removed, or recessed into the device case so that it can only be pressed using a thin and long object. This is another security measure against inept users.

You did everything, the lights slowly went out and everything turned on in the same way, after which only the indicators of the network, wi fi signal and connected devices remained on and flickering. Now it remains to go to the browser and enter 192 168 1 1 or 192.168.0.1 in the address bar, then the router will require factory data - those that you prudently copied from the case. Remember to pay attention to the keyboard layout and case, this will allow you to enter data accurately on the first try.

After that, you will automatically go to the settings menu. Most manufacturers try to make it intuitive for users so that they do not get confused where exactly to enter and what.

Among a large number tabs and subpages you are interested in what will be called “wireless network” or, alternatively, “ wireless connection". In the subsection, which is titled “basic” or “general” settings, you can change the name of the router, which is important if one of the neighbors has the same model. The name can be anything, there are no restrictions on what you choose.

If you personally still have a standard login and password on your router, or you know the ones that are used, then you can change them by entering the settings.

You do everything in the same way as when you roll back to the factory settings, skipping pressing “reset” on the router. Log in to the browser using the links 192 168 1 1 or 192.168.0.1, open the settings window, select the tab responsible for managing the security of the router.

Enter the old access keys in the required fields, and the new ones below.

Specific models and examples

Consider basic and common router models and program interfaces that will help you change the password for wi-fi.

Routers manufactured under the Tp-Link brand are distinguished by ease of operation and a clear interface, not to mention the fact that the popularity of this brand made it recognizable, and also influenced the Russification of the brand. So, by switching tabs, you can easily find the one you need and figure out how to change the password on the Tp-Link router.

After entering the router management, open the section in the list of tabs on the left “System Tools” (usually the penultimate field), in the drop-down submenu, select the tab "Password" . Enter your previous personal login and password in the indicated fields (red rectangle in the photo). In the area highlighted in blue, enter the new access codes. The password will have to be entered in two fields to confirm. Then press the button "Save".

Since each router has a unique interface, the names of some sections may differ. However, they all work on the same principle and have almost the same functions. Let's figure out how to change the password from the Wi-Fi network using the D-LinkDir-615 router as an example.

D-Link routers are not so common, so it is likely that when buying old model The interface will be in English. But the manufacturer took care of the clarity of access control, so there should be no problems.

Entering the router management interface, in the left list, select the tab "Control" , then go to the password change window. The Wi-Fi password will have to be confirmed, and then click the save settings button. The changes made are either activated immediately or will take effect after restarting the PC, depending on the OS of the computer.

Now you know how to change the Wi-Fi security password through the router settings menu.

How to change the password from the virtual network

We figured out the router, and as you can see, everything is extremely simple. But, sometimes it happens that for the implementation home network router is not used. The role of the access point is played by a laptop that is connected to the Internet and distributes it via WiFi. Such groups are called virtual. Is it possible to change the password for Wi-Fi in this case? Yes it is possible. Only depending on how the group was created, the procedure for changing the key differs.

If you created a connection using the management console (computer-to-computer connection), then everything is very simple. You need to open the network control center. To do this, right-click on the connection icon in the tray. In the window that appears, select “Wireless Network Management” . Now you need to find the required connection, right-click on it and select "Properties" .

The window that appears is divided into two tabs. We are interested in the second - security. Here we tick the box “Display input characters” and see the current key. To change the password on the WiFi router, simply enter other values ​​and click "OK" .

If you created a group using command line, then to change the code there is special team. Run command prompt (as administrator) and write the following: netsh wlan set hostednetwork mode=allow ssid=My_virtual_WiFi key=12345678 keyUsage=persistent. Instead of the numbers 12345678, enter the new password that you want to set. Then start the network again and connect to it, but enter a new identifier.

Now you know how to change the password on a WiFi router. And regardless of how it was organized.

Pay attention to the details that are important to connect

Changing the wi-fi password implies the need to reconnect to the network from all devices used without exception. If you want to check who is connected to the network, this information is present in the computer settings. Open "My computer" and in the rubricator on the left, find the subsection "Networks" . It displays users and devices connected to personal network within a defined period of time

The list of available networks and their settings will have to be searched in the tab "Control Panel" . Therefore, it was said above about the need original name for a router - it is difficult to choose a personal one from five identical ones.

At the stages of working on changing the Wi-Fi password, difficulties arise, but solving them is not difficult. Let's move on to the main issues:

1. The factory sticker with the installation data was not preserved on the router. After searching the photo on the network, determine the model of the device, and on the manufacturer's website or specialized forums you will find the necessary, accurate and detailed information.
2. It is impossible to go to the specified address 192 168 1 1 or 192.168.0.1 to change the settings. Open the menu "Start" , find the line “Find programs and files” and type cmd. Press Enter, which will open a command prompt or registry line. The ipconfig cipher is entered in the line, again confirm the command with the Enter key. In the window that appears, find the line that will be signed as "Main gate" . The combination of characters after it is the address for going to the router settings.

The illustration highlights the points necessary for configuration: codes for accessing the registry and the address line of the basic gateway. Do not forget that the dot and space are considered characters and enter the address without errors, or use the “copy/paste” commands

The article discusses the basic options for changing the password of a Wi-Fi router, and what is connected with it. Good luck, and don't forget about the security of your network.

If the router was just purchased and no one has configured it, you can connect to the newly created network without entering any identification data. That is, any owner of a device with a Wi-Fi module can use all the delights of the Internet without the permission of the owner of the equipment. To prevent this from happening, you need to change the password on the Wi-Fi router immediately after creating the network.

Perhaps the appearance of an extra user will not affect the speed - most providers are able to provide it with a decent level with unlimited traffic. But unfortunately, not everything is so simple. There are a number of negative circumstances, the possibility of which must be remembered, leaving the network without proper protection.

Each connected device requires the modem to allocate an IP address and hardware resources to ensure communication. All this creates an additional load on the distributing equipment, which, in turn, will negatively affect the speed and stability of the connection as a whole. In addition, the absence password protection, lowers the overall level of security and somewhat simplifies access to personal information.

The above is enough to think about changing the authorization settings, especially if there are none, for example, when starting a new router. Next, let's look at how to quickly change or set a Wi-Fi password on routers from different manufacturers (not to be confused with the admin panel login settings). Some will be affected important points regarding security settings.

Password Rules

Not every new password is able to provide the proper level of security. Many users, especially beginners, prefer not to fool around and enter a set of simple numbers, for example, all units or 12345678. More resourceful ones use their name or date of birth. The meaning is clear: to think briefly and easily remember.

Video on compiling the correct password:

Hacking a network with such protection will take no more than 5 minutes even for a schoolboy who is not too lazy to read a couple of articles on the Internet. There are many programs that come with large dictionaries of frequently used security keys. It is enough to have a desire, a regular laptop or smartphone, to provide free access to the network of careless neighbors.

What should be the new password:

• You need to use 8 or more characters (the standard will not allow less);
• Must consist of Latin letters of different case (large and small), numbers, signs (@$# and others);
• The sequence of characters must be random and varied. That is, you do not need to enter 6 identical letters, but at the end several characters and numbers. A good password should inspire fear at the thought of having to remember it.
• As mentioned above, no prime numbers, names and dates of birth.

Some users find it difficult to come up with a replacement password on their own. Then you can resort to the help of special online generators that will make up a code of any length and complexity. In addition, the network has services for the selection and storage of protective data.

Video on working with the utility for creating and storing passwords:

Once a suitable password has been thought up or generated, it must be saved. You should not rely on your own memory, it is better to write it down on paper, for example, in a notebook. In parallel with the paper version, you can create text file on the computer.

Suppose a password is generated or invented, recorded and stored on several media. This is of little use as long as it is not used in the security settings of the Wi-Fi network. Next, consider the process of changing the password on the router.

Changing the password

To change the security settings of the access point, you need to get into its management interface. To do this, you need to use the address bar of the browser or the utility supplied on the disk with some routers. The first way is simpler and more universal.

First, find out the IP address of the router. In most cases this is . The exact value is indicated on the label on the bottom of the device.

There you can also find out the data for user authorization, set by default. As can be seen from the figure, the login and password are admin. This combination is relevant for most models. If suddenly the sticker is lost or erased, the necessary information is in the instructions, if there is no instruction, we look on the Internet.

Here you need to activate the radio button indicated by the red arrow, and then adjust the margins below.

• Version. Leave "Automatic" for correct work with big amount devices.
• Encryption. We choose AES (the most reliable and proven standard).
• PSK password. In this field, enter the invented or generated network security key.

After specifying all the necessary parameters, we confirm the changes by pressing the "Save" button and reboot the router. The offer to restart will appear on the same page. In the absence of it, a reboot is optional, but it should be done so that all connected Wi-Fi users are authorized. This can be done through the system tools.

After all the above manipulations, the first access to the wireless network will be possible only after entering the password. If over time you need to reinstall the security data, you will have to follow the same sequence of steps as for installing a new authorization key.

Difficulties that may arise during security setup

The most common problems are the absence or loss of the IP address of the admin panel or authentication data in it. It is solved simply: the router firmware is brought to the factory state using a special button.

On the TP-Link model, it must be pressed and held for 10 seconds. The settings will be reset to factory settings and you will be able to log in using standard address using the admin/admin pair for authorization.

In case of loss or change of the IP address (for example, it was changed if there are several identical routers on the network), you can find it out by running Windows console on a laptop or PC. To do this, you need to type the combination "Windows + R", the "Run" window will open, in which we enter "cmd". The console will launch. In it we write "ipconfig" and press "Enter".

Opposite the inscription "Main gateway" will be the address of the router to which the device is connected.

Changing the password on popular routers

Using the above sequence of actions, you can change the password on any Wi-Fi router. Differences can be in the access point management interface, its address and authorization data. Next, you need to find the protection tab wireless mode or similar menu item. Let's take a closer look at how the password is changed for popular models.

D-Link

Address: 192.168.0.1. Login/password pair: admin. On home page Select "Advanced Settings" at the bottom.

On the next one, select "Security Settings" (circled).

A difficult-to-remember password has been set for the WiFi router that you cannot remember. It can be easily changed - in just a few minutes. Everything is very simple.

Often users use wifi settings default router, especially when someone we know set it up for us or got it from our carrier. Usually the password for WiFi networks written on a label stuck to the bottom of the router, which is a long and complex combination of numbers and symbols. However, it can be changed.

Step 1: Find the IP address of the router and enter the device settings

To change it, we must go to the settings WiFi router. Login is carried out by entering the IP address of the router in the browser line from any device (computer, laptop) connected via network cable or WiFi. For example, depending on the model, it may be 192.168.0.1 (D-Link) or 192.168.1.1 (TP-Link, Zyxel, Asus). If you do not know the IP address, you can look it up through the command line.

To do this, press the combination Windows keys+ R and enter cmd command. At the command line console, type the ipconfig command. In the list that opens, find the line with the wireless network adapter and the Default Gateway field. Actually, the IP address of the device will be registered in the default gateway - most likely, 192.168.0.1 or 192.168.1.1.

Open a browser and enter the IP address of the router in the address bar. The first window will open where you will need to enter your username and password. You can find them in the instructions for the device (as a rule, this is a combination of admin / admin).

Step 2: Set a New WiFi Password

WiFi routers have different software, so it makes no sense to describe them, because for each model are offered detailed instructions. Nevertheless, all settings are similar, only the software shell differs.

In the main settings window, we are interested in the wireless network section (Wireless Settings / Wireless Network Settings / Wi-Fi Settings). We go to this section and look for the “Password” or “Network key” or “WPA2 Shared Key” (WPA2-PSK) field and the like. In some models of routers, the field for changing the password is located in the Wireless Network Security subsection.

We remove the old password and enter a new one, then save the changes. After changing the password in the router, you need to change it on all devices (computers, laptops, tablets, etc.) connected to the WiFi network. You see, there is nothing difficult in changing your password. And if you notice that the Internet has started to work more slowly or there are suspicions that someone from the outside has connected to your home network, you can easily change it.

Hello.

Usually, questions related to changing the password on Wi-Fi (or setting it, which, in principle, is done identically) arise quite often, given that Wi-Fi routers have recently become very popular. Probably, many houses, where there are several computers, TVs, and other devices, have a router installed.

The initial configuration of the router is usually carried out when you connect to the Internet, and sometimes they set it up “just as quickly as possible”, without even putting a password on the Wi-Fi connection. And then you have to deal with some of the nuances yourself ...

In this article, I wanted to talk in detail about changing the password on a Wi-Fi router (for example, I will take several popular manufacturers D-Link, TP-Link, ASUS, TRENDnet, etc.) and dwell on some of the subtleties. So…

Do I need to change my Wi-Fi password? Possible problems with the law ...

What gives a Wi-Fi password and why change it?

The Wi-Fi password gives one trick - only those to whom you tell this password can connect to the network and use it (that is, you control the network).

Here, many users are sometimes perplexed: “why are these passwords needed at all, because I don’t have any documents or valuable files on my computer, and who will hack ...”.

In fact, it is, there is no point in hacking 99% of users, and no one will do it. But there are a couple of reasons why you should still set a password:

1. if there is no password, then all neighbors will be able to connect to your network and use it for free. Everything would be fine, but they will occupy your channel and the access speed will be lower (besides, all kinds of “lags” will appear, especially those users who like to play network games will immediately notice this);
2. anyone who has connected to your network - can (potentially) do something bad on the network (for example, distribute some kind of prohibited information) from your IP address, which means that you may be asked questions ( can get on your nerves...).

Therefore, my advice: set the password unambiguously, preferably one that cannot be picked up by ordinary enumeration, or by random dialing.

By the way, did you know that a password of 8 characters, consisting of lowercase and uppercase letters, as well as numbers, can be cracked in 4 minutes using modern high-performance equipment? The following platform will help you create a password and check its strength online: https://calcsoft.ru/generator-parolei.

How to choose a password or the most common mistakes…

Despite the fact that it is unlikely that anyone will break you on purpose, it is highly undesirable to set a password of 2-3 digits. Any brute-force programs will break such protection in a matter of minutes, which means they will allow any unkind neighbor who is more or less familiar with computers to harm you ...

What is better not to use in passwords:

1. their names or the names of their closest relatives;
2. dates of birth, wedding, some other significant dates;
3. it is extremely undesirable to use passwords from numbers that are less than 8 characters long (all the more so to use passwords where numbers are repeated, for example: “11111115”, “1111117”, etc.);
4. in my opinion, it is also better not to use various password generators (of which there are quite a lot).

interesting way: come up with a phrase of 2-3 words (at least 10 characters long) that you will not forget. Then just write some of the letters from this phrase in capital letters, add a few numbers to the end. Cracking such a password will only be possible for the elite, who are unlikely to spend their efforts and time on you ...

Changing the password in Wi-Fi routers from different manufacturers

1) Security settings that are needed when setting up any router

Select WEP, WPA-PSK, or WPA2-PSK certificate

Here I will not go into technical details and explanations of different certificates, especially since ordinary user it is not necessary.

If your router supports WPA2-PSK- choose it. To date, this certificate provides better protection wireless network.

remark: on inexpensive models of routers (for example, TRENDnet) I came across such a strange work: when you turn on the protocol WPA2-PSK- the network began to break off every 5-10 minutes. (especially if the network access speed was not limited). When choosing another certificate and limiting the access speed, the router started working quite normally ...

Encryption type TKIP or AES

These are two alternative types of encryption that are used in WPA and WPA2 (AES in WPA2) security modes. In routers, you can also find a mixed TKIP + AES encryption mode.

I recommend using type AES encryption(it is more modern and provides more reliability). If it is impossible (for example, the connection will start to break or it will be impossible to establish a connection at all) - choose TKIP.

2) Changing the password on D-Link routers (relevant for DIR-300, DIR-320, DIR-615, DIR-620, DIR-651, DIR-815)

1. To access the router settings page, open any modern browser and enter in the address bar: 192.168.0.1

3. If you did everything correctly, then the browser should load the settings page (Fig. 1). To set up a wireless network, you need to go to the section Setup menu Wireless Setup(also shown in Fig. 1)

Rice. 1. DIR-300 - Wi-Fi settings

4. Next, at the very bottom of the page there will be a line Network key (this is the password for accessing the Wi-Fi network. Change it to the password you need. After the change, do not forget to click the " Save settings«.

Note: The Network Key line may not always be active. To see it, select the mode " Enable Wpa/Wpa2 Wireless Security (enhanced)» as in fig. 2.

Rice. 2. Setting a Wi-Fi password on the D-Link DIR-300 router

On other models D-Link routers there may be slightly different firmware, which means the settings page will be slightly different from the above. But the password change itself occurs in a similar way.

3) TP-LINK routers: TL-WR740xx, TL-WR741xx, TL-WR841xx, TL-WR1043ND(45ND)

1. To enter the settings of the TP-link router, type in the address bar of the browser: 192.168.1.1

2. As both password and login, enter the word: " admin " (without quotes).

3. To configure the wireless network, select (on the left) the Wireless section, the Wireless Security item (as in Fig. 3).

Note: Recently, more and more often come across Russian firmware on TP-Link routers, which means setting it up is even easier (for those who do not understand English well).

Next, select the mode " WPA / WPA2 - Perconal"And in the line PSK Password enter your new password (see Figure 4). After that, save the settings (the router will usually reboot and you will need to reconfigure the connection on your devices that previously used the old password).

4) Wi-Fi setup on ASUS routers

Most often there are two firmware, I will give a photo of each of them.

4.1) Routers ASUS RT-N10P, RT-N11P, RT-N12, RT-N15U

192.168.1.1 (recommended browsers: IE, Chrome, Firefox, Opera)

2. Login and password to access the settings: admin

• in the SSID field, enter the desired network name in Latin letters (for example, "My Wi-Fi");
• Authentication Method: Select WPA2-Personal;
• WPA encryption - select AES;
• WPA Preshared Key: Enter the Wi-Fi network key (8 to 63 characters). This is the password for accessing the Wi-Fi network. .

The wireless connection setup is complete. Click the "Apply" button (see Figure 5). Then you need to wait for the router to reboot.

Rice. 5. Wireless network, settings in routers: ASUS RT-N10P, RT-N11P, RT-N12, RT-N15U

4.2) ASUS routers RT-N10E, RT-N10LX, RT-N12E, RT-N12LX

1. Address to enter the settings: 192.168.1.1

2. Login and password to enter the settings: admin

3. To change the Wi-Fi password, select the " Wireless network» (on the left, see Fig. 6).

• In the SSID field, enter the desired network name (enter in Latin);
• Authentication method: select WPA2-Personal;
• In the WPA Encryption: list, select AES;
• WPA preshared key: Enter the Wi-Fi network key (8 to 63 characters);

The wireless connection setup is finished - it remains to click the " Apply"And wait for the router to reboot.

5) Setting up a Wi-Fi network in TRENDnet routers

1. Address for entering the router settings (by default): http://192.168.10.1

2. Login and password to access the settings (by default): admin

3. To set a password, you need to open the "Wireless" section of the Basic and Security tabs. In the vast majority of TRENDnet routers, there are 2 firmware: black (Fig. 8 and 9) and blue (Fig. 7). The settings in them are identical: to change the password, you need to specify your new password opposite the KEY or PASSHRASE line and save the settings (examples of the settings are shown in the photo below).

Rice. 7. TRENDnet ("blue" firmware). Router TRENDnet TEW-652BRP.

Rice. 8. TRENDnet (black firmware). Setting up a wireless network.

6) ZyXEL routers - setting up Wi-Fi on ZyXEL Keenetic

1. Address to enter the router settings: 192.168.1.1 (recommended Chrome browsers, Opera, Firefox).

2. Login for access: admin

3. Password for access: 1234

4. To set the settings for the wireless Wi-Fi network, you need to go to the section " Wi-Fi network", tab" Connection«.

• Enable point wireless access - we agree;
• Network name (SSID)- here you need to specify the name of the network to which we will connect;
• Hide SSID- it is better not to turn it on, it does not give any security;
• Standard- 802.11g/n;
• Speed- Auto selection;
• Channel- Auto selection;
• Click the "Apply" button « .

In the same section " Wi-Fi network" You need to open the tab " Security«. Next, set the following settings:

• Authentication - WPA-PSK/WPA2-PSK;
• Type of protection - TKIP/AES;
• Network key format - ASCII;
• Network key (ASCII) - specify our password (or change it to another).
• Press the button " Apply"And wait for the router to reboot.

7) Router from Rostelecom

1. Address to enter the router settings: http://192.168.1.1 (recommended browsers: Opera, Firefox, Chrome).

2. Login and password for access: admin

If you cannot enter the router settings, I recommend that you read the following article:

Connecting devices to a Wi-Fi network after changing the password

Attention! If you changed the router settings from a device connected via Wi-Fi, your network should disappear. For example, on my laptop, the gray icon is lit and it says " not connected: there are available connections» (see fig. 13).

Rice. 13. Windows 8 - Wi-Fi network is not connected, there are available connections.

Let's fix this error...

Connecting to a Wi-Fi network after changing the password - Windows 7, 8, 10

(Actual for Windows 7, 8, 10)

All devices connecting via Wi-Fi need to be reconfigured network connection, since they will not work with the old settings.

Here we will touch on how to configure Windows when changing the password on a Wi-Fi network.

1) Right-click this gray icon and select " network control center and public access » (see fig. 14).