If you are in power settings acer laptop, Asus, hp and any other did not change anything on their own, then when the lid is closed, it will either turn off or go into hibernation.

Why does my laptop turn off when I close the lid? This is made for you. The fact is that most do not know that if the laptop does not turn off when it is closed, but works, then the screen can get very hot and fail.

When the lid is closed, the display is in very close contact with the keyboard, or rather the place where the processor is located, and it can heat up to 90 degrees.

Therefore, the manufacturer has provided protection - turning off the laptop when the lid is slammed. This procedure is not only in windows7 and windows 8, but also in vista and XP.

Setting the laptop lid when closed

To configure the actions that take place when the lid is closed, enter the control panel and press "power options".

I describe for windows 7, but in other versions it is almost identical. Then on the left side, click on the line: "action when closing the lid."

After that, you will move to another tab, where, as you can see in the figure, nothing actually needs to be explained.

Choose the most suitable option for you and click "save changes" at the bottom. Only if you select "no action required" - be very careful - screens are expensive.

It is best to put a dream. So you save all your work data and nothing will happen to the screen.

In general, you can change a lot in the power settings, including dimming the screen and turning it off completely when the laptop is idle.

All "default" settings are usually needed only for beginners so that they do not "go too far". More experienced users set everything up for themselves. Good luck.

vsesam.org

Configuring sleep mode and actions when closing the laptop lid

The computer is a whimsical thing and does not like constant switching on and off. It is advisable to keep it on all the time (it's better than turning it on and off 5 times a day). So you prolong the life of your iron friend. Also kind developers software and equipment figured out how to save on electricity and let the equipment rest when there are no tasks and the user is absent. For this in operating system Windows has created several power modes, standby and hibernation.

Let's deal with sleep and hibernation first. Sleep mode is a partial shutdown of equipment (for example, hard drive and monitor), conserving energy, while maintaining response to external influences (when you press any key or move the mouse, the computer wakes up). Everything that you open or run will remain in the state in which you went to sleep. The mode can be launched both from the Start menu, and you can set automatic switching according to the schedule after idle time (but more on that later). Hibernation is turning off the computer while saving all the data at the time of entering the mode. That is, even if you played music and was open word document, after exiting Hibernation (next turning on the computer), everything will be restored to its previous state (even the player will play from the same place). Hibernation mode should be selected if you leave the computer for a long time or leave it overnight.

You can call these two modes manually from the Start menu (to display, click on the button with a triangle):

Choosing actions to change the mode of operation of the computer

Now let's figure out how to set up a schedule and various power modes.

To do this, go to Start -> Control Panel -> Power Options:

To configure actions when the computer is idle, click on the link Set up a power plan for the active mode (in the picture it is Balanced). We get a window:

In this case, the plans are displayed for a laptop, so we see two columns (battery and mains). Adjust to taste. If your computer has problems waking up from sleep mode, then you should put Never in front of this item.

Now let's deal with the actions when closing the laptop lid. Let's press the back button in our window (the blue arrow to the left in the upper left corner of the window) and now select Action when closing the lid:

You can also change what happens when you press buttons. As we can see, we have the value set for mains power when the lid is closed: No action required. What is it for? For example, to play music without interruption when the lid is closed or when connected external monitor so as not to keep the laptop open (you can connect USB keyboard and use the laptop as regular computer with monitor).

pcguideline.com

Shut down when closing laptop lid

By default, when you close the laptop lid, the system goes to sleep. You can also configure the system so that when the lid is closed, work is completed.

Sleep saves all open applications while closing the lid, and shutting down closes all applications and you may lose something you need. But still, if you want to configure the shutdown of the computer when the laptop lid is closed, follow the instructions below, these steps will not take you much time. The instruction was written in Windows 10, but all actions are also performed in other versions of Windows.

1. Go to "Power Options": right-click on the battery icon and select "Power Options", or type "Power Options" in the search bar and select it from the results found.

2. In the left column, select "Action on lid close".

3. Opposite "When the lid is closed", select "Shut down" from the battery and from the mains, then left-click on "Save changes".

Now, when you close the lid, the computer should turn off. But, if you have some applications open and you close the laptop lid - the next time you lift the lid, you will see that the computer has not been turned off and asks you what to do with open applications. You can close all open applications each time before closing the lid, or make some changes in the registry editor and the system will automatically close all open applications when the lid is closed. It is recommended that you create a system restore point before editing the registry.

1. Open the registry editor: in the search bar or in the run menu (execute is called by the win + r keys), write regedit and press the Enter key.

2. In the left column, go to the HKEY_CURRENT_USER\Control Panel\Desktop section => right-click on the Desktop section => in the menu that opens, select "Create" => String value.

3. Name cos given parameter AutoEndTasks and immediately open it by double-clicking the left mouse button.

4. In the "Value" field, put 1 and click the left mouse button on "OK".

Close the registry editor, now every time you close the laptop lid, the system will complete everything open programs and your work. That's all for today, if you have additions - write comments! Good luck to you 🙂

How to set actions when closing laptop lid in Ubuntu

On some laptops with the OS, the lid close action setting categorically refuses to work correctly. Classic tuning ( System settings> Nutrition), which sets the behavior of the operating system in such cases, is completely useless. I'll tell you how to fix this error and at the same time acquire a few additional features.

How to set actions when closing laptop lid in Ubuntu

1. The built-in power manager can only sleep, suspend and do nothing. To expand the possibilities, install a set of scripts pmutils, which handle suspend and resume.

sudo apt install pm-utils

2. Editing the file logind.conf. But first, let's make a backup.

sudo cp /etc/systemd/logind.conf /etc/systemd/logind.conf.back

3. Open logind.conf

sudo nano /etc/systemd/logind.conf

4. Uncomment (remove #) the following line. Also change its value:

HandleLidSwitch=lock

Now the laptop will lock the OS when the lid is closed. This directive also supports the following values:

• ignore
• power off
• reboot
• kexec
• suspend
• hibernate
• hybrid sleep

Explaining what's what, I think, there is no point. More: man logind.conf

5. It remains to restart the service:

Systemctl restart systemd-logind.service

Thanks for reading! Subscribe to my channel at Telegram And Yandex.Zen . Only there Latest updates blogs and world news information technologies. Also, read me on in social networks: Facebook , Twitter , VK , OK.

Rep for the post! Thank you for your work!

On this moment have the opportunity to become patron to support the blog monthly with a donation, or use

As a rule, when you close the laptop lid, it goes into sleep mode. If you want it to continue to work in normal mode, use the instructions below.

By default (if you have not changed anything in the operating system settings), when you close the laptop lid, it goes into sleep mode. However, you can choose what action to take when you do this:

• No action required
• hibernation
• Shutdown

Despite the similarity of sleep and hibernation, there is a difference between them.

Sleep mode keeps your computer running and consumes some power to maintain the state of the processor, RAM, and some other components.

In hibernation mode, the computer is completely de-energized, and an exact copy of the state of RAM is written to its hard disk. When enabled, this information is transferred back to RAM. As you can see, when using hibernation, you can not be afraid of battery drain, which is better suited for laptops.

How to change the action that happens when the lid is closed

1. Go to the menu " Start" - "Settings» or press the keyboard shortcut Win+I to open the Windows Options window.

3. In this window, find the item " Extra options food". Click on it and in the left side menu select " ».

Any questions? Ask them in the comments. We will definitely try to help you!

When you close the lid, the laptop goes to sleep, but you want it to continue to function normally, performing current tasks? Read the tips below and you will learn how to close the laptop so that it does not turn off.

Why is this happening

The fact is that by default, operating systems have settings that specify certain actions for each event. When you close the lid, depending on the version of the OS, sleep or hibernation is activated.

What is the difference

Very often, users confuse these two functions or even believe that they are one and the same. To finally understand the issue, it is worth making explanations that are relevant for Windows, starting with the version of Vista and higher.

Sleep mode is designed to save energy by reducing its consumption and allow you to quickly resume normal operation when you press any key. To draw analogies, this mode is very similar to the pause function in a video player - the system stops all operations, but does not completely cut off the power supply and is ready to immediately return to normal mode at the request of the user.

Hibernation requires the least amount of energy, since when switching to this mode, the system saves open documents and data of all active programs on HDD and then turns off the power supply. At the first request of the user, the computer turns on again, and the OS loads the saved data into RAM, which allows you to start working from the place where it stopped.

How to make a laptop work closed

It will take you a maximum of five minutes to solve the problem. The operation is very simple and does not require special knowledge and skills. Depending on the version of the OS that you have installed, go directly to the desired section.

Disable sleep/hibernation when closing the lid in Windows 10

1. Click "Start" and turn on "Settings".
2. Go to the first section, which is called "System".
3. In the left vertical menu, find the line "Power and sleep".
4. At the bottom right, under Related settings, click Advanced power settings.
5. In the new window that opens, find the line "Actions when closing the lid" in the vertical menu on the left and click on it.
6. Find the item "When the lid is closed" and set the value to "No action required". Don't forget to save your changes by clicking the appropriate button.

How to close the laptop so that it works - Windows 8

1. Go to Explorer, in the left column find the line "Computer" and click on it.
2. On the top panel there will be an icon "Control Panel", where you need to go.
3. In the window that opens, select the "Hardware and Sound" tab.
4. Go to the "Power Options" section.
5. In the menu on the left, click on the line "Actions when closing the lid."
6. In the line "When the lid is closed", set the value to "No action required".
7. Save your changes.

How to leave laptop on with lid closed - Windows 7

1. Go to "Start" and select "Control Panel".
2. Go to the "Power" section;
3. In the left part of the window, select "Actions when closing the lid";
4. Find the line "When the lid is closed" and set the value to "No action required".
5. Save your changes.

Okay, back to the topic! In the settings, you can select only 4 actions that will occur when the laptop lid is closed. Let's take a quick look at each of them, without going into details, and then see where these settings are located in the operating room. Windows system 7.

• No action required. As you may have guessed, if you select this option, then when you close the lid, no action will occur. For example, you can turn on the music and close the laptop, the music will continue to play.

• Sleep mode. Low power mode that can be exited by moving the mouse or pressing any button on the keyboard. In this mode, the laptop consumes electricity, but very little. The current session is written to the RAM, and when you exit the "Hibernation" it is unloaded and you can continue working further.

• hibernation. If you select this mode, then when you close the lid of the laptop, the current session will be recorded on the hard drive, and the laptop itself will be completely turned off. When you turn on the laptop, the session will boot from the hard drive and you can continue working further.

• Shutdown. The well-known mode can be found if you open the Start menu. If you select this mode in the laptop lid settings, then when you close the lid, the laptop will turn off. Probably invented specifically for the lazy. I closed the lid, the laptop turned off, and you don’t need to climb into the “Start”!

You can read more about each mode at windows.microsoft.com or visit the excellent wikipedia site. Now let's go to the control panel and see where these settings are located.

Adjusting the laptop when closing the lid.

Let's go to the menu Start "and open" Control Panel » for convenience, specify « small icons ” and select “ Power supply »

In the next window, in the menu to the right, select " Lid close action ».

Opens a window in which you can specify the actions you need when closing the lid.

• You can specify different actions depending on the situation. If the laptop is not connected Charger, then you can in the list " On battery " choose " Dream". Then, when you close the lid with no charging connected, the laptop will plunge into "Hibernation". The same is true for the situation where memory» connected. You can choose the action you want.

With such simple actions, actions are configured when the laptop lid is closed. On this I will end this not a big post, good luck and good luck to everyone !!!